Feltec Zinc Phosphate Primer


Product Description

Feltec Zinc Chromate Primer is an alkyd-based high quality rust inhibitive primer for priming iron and steel.
Available in Green and Grey.

Packing Size

5L & 20L.

Theoretical Coverage

13 X 15 ml / liter per coat.
 Color Options:
Colour Green and Grey
Specific Gravity Approximately 1.25
Finish Low sheen
Flash Point About 35°C


Recommended for use as a general purpose primer for metals. Light alloys and galvanized surfaces should be treated with Feltec Etching Primer E500, prior to painting with Feltec Zinc Phosphate Primer.

Recommended Dry film Thickness 30 ~ 40 microns
Drying Time (at 27ºc) Touch Dry : 2 hours
Hard Dry : 8 hours
Recoating Interval Min : 10 hours
Theoretical coverage 12 ~ 15 m² / liter per coat
Volume Solids Approx. 45%


Application Method Brush/ Roller/Spray Gun
Mixing Ratio (by volume) The paint is ready for use after proper stirring. If thinning is required, add 5% of Federal General Thinner MO-464 for easy application.
Thinner / cleaner Federal General Thinner MO-464
Surface Preparation Surfaces must be dry, clean, sound and free from any loose material, dirt, grease or wax.


Storage The product should be kept in a cool and well ventilated place protected from direct sunlight. Container must be kept tightly closed.
Handling Handle with care. Stir well before use.
Shelf life 12 months
Packing Size 5 liters