Feltec Micaceous Iron Oxide


Product Description

Feltec Micaceous Iron Oxide Paint is a high durable finishing paint based on micaceous iron oxide, an extremely hard lamellar, or flake like pigments possessing a high degree of water impermeability and particularity suitable for use under tropical conditions.


Packing Size

5L.

Theoretical Coverage

8.5 X 10 ml / liter per coat.
 Color Options:
Colour 9811 Medium Grey
Specific Gravity Approximately 1.40
Finish Low sheen
Flash Point About 35°C

Feltec Micaceous Iron Oxide Paint is used for the protection of steelwork, bridges, superstructures and manufacturing plants, lamp post, safety railings, transmission towers, etc.

Recommended Dry film Thickness 50 ~ 60 microns
Drying times Touch Dry : 2 – 4 hours
Hard Dry : 8 hours
Recoating Interval Min : 12 hours
Theoretical coverage 8.5 - 10 m² / liter per coat
Volume Solids Approx. 50%

 

Application Method Brush/ Roller/Spray Gun
Mixing Ratio (by volume) The paint is ready for use after proper stirring. If thinning is required, add 5% of Federal General Thinner MO-464 for easy application.
Thinner / cleaner Federal General Thinner MO-464
Surface Preparation Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease etc.

 

Storage The product should be kept in a cool and well ventilated place protected from direct sunlight. Container must be kept tightly closed.
Handling Handle with care. Stir well before use.
Shelf life 12 months
Packing Size 5 liters