Feltec 1200 WB


Product Description

Feltec 1200 WB Wall Sealer is a premium quality water-based sealer for interior and exterior use. 


Packing Size

5L, 18L.

Theoretical Coverage

10 - 12 m² / liter per coat
 Color Options:
Colour White only
Specific Gravity Approximately 1.20 – 1.30
Finish Low sheen
Flash Non-flammable

Feltec 1200 WB Wall Sealer is ideally suited for new and old surfaces, porous and chalking surfaces that can be located either in the interior or exterior of the buildings e.g cement, brickwork, plaster, asbestos, etc.

Recommended Dry film Thickness 30 ~ 40 microns
Drying times Touch Dry : 15 - 30 minutes
Recoat Min : After 2 hours
Theoretical coverage 10 – 12 m² / liter per coat
Volume Solids Approximately 39%

 

Application Method Brush/ Roller/Spray Gun application.
Mixing Ratio (by volume) Dilution not necessary. If required, dilute with water (maximum) 5% based on total component.
Thinner / cleaner Water
Surface Preparation Surfaces to be painted should be througly dry and clean, free from grease or wax, flake, chalk and dirt.

 

Storage The product should be kept in a cool and well ventilated place protected from
direct sunlight.
Handling Handle with care. Stir well before use.
Shelf life 12 months
Packing Size 5L & 18L