Feltec 1011 Wall Sealer


Product Description

Feltec 1011 Wall Sealer is a high quality solvent-based sealer for interior and exterior use. 

Packing Size


Theoretical Coverage

10 X 12 ml / liter per coat.
 Color Options:
Colour White
Specific Approximately 1.27
Finish Matt
Flash Point About 23°C

 Feltec 1011 Wall Sealer is suitable for use on both new and previously painted surfaces, such as masonry surface, brickwork, plaster, cement and asbestos

Recommended Dry film Thickness 30 ~ 40 microns
Drying times Touch Dry : 30 minutes
Hard Dry : 1 hours
Recoat Min : 1 hours
Theoretical coverage 10 – 12 m² / liter per coat


Application Method Brush/ Roller/Spray Gun
Mixing Ratio (by volume) The paint is ready for use after proper stirring. If thinning is required, water may be added up to a max 5%.
Thinner / cleaner Water
Surface Preparation Surfaces must be dry, clean, sound and free from any loose material, dirt, grease or wax.


Storage The product should be kept in a cool and well ventilated place protected from direct sunlight. Container must be kept tightly closed.
Handling Handle with care. Stir well before use.
Shelf life 12 months
Packing Size 5 & 20 liters